ATOMSTACK P7 M30 Portable Laser Engraving Machine Wood Cutting Single Arm Laser Engraver Eye Protection Metal Engraving

ATOMSTACK P7 M100% Protection Laser Engraving Machine Portable laser engraving machine, all aluminum alloy structure, quick installation, metal engraving, 304 stainless steel engraving, high-energy wood cutting, wood engraving, slate engraving, high-power laser cutting, laser cutting equipment, laser cutting Machine, CNC laser, CNC engraving

Item Model Number: ATOMSTACK P7 M30

Engraving area:  200*200mm

Engraving materials: wood, bamboo, cardboard, plastic, leather, MDF, slate, lacquered metal, mirror stainless steel;

Cutting material: cardboard, non-woven fabric, veneer, acrylic, some thin plastic board, sponge, MDF, leather;

Laser power: 30W

Laser Output Power: 5W

Wave Length: 445 ± 5nm

Engraving accuracy: 0.01mm

Focusing method: fixed focus laser, no need to focus

Laser protective cover: Protect the user’s eyes and prevent pets from grabbing the laser spot.

Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system.

Input Format: NC, BMP, JPG, PNG, DXF, etc.

Data transmission method: USB connection.

Input Voltage: AC100-240V, 50/60Hz

Output Voltage: DC12V, 5A

Certification: CE FCC RoHS FDA PSE

Features

1.Eye-protection flame-retardant filter panoramic glass: The flame-retardant filter panoramic glass can filter 97% of the ultraviolet light, which plays a very good role in protecting your eyes. You and the people around you do not need to wear goggles, you can also clearly Watch laser engraving. Reduce the cost of your goggles and the inconvenience of wearing goggles. The glass is flame retardant and safer to use.

2.Robust and easy-to-install structure design: The all-aluminum alloy anodized structure design makes the machine more durable and improves the accuracy of engraving. The portable all-metal structure, 85% pre-assembly, can be installed in 5 minutes.

3.Upgraded version of high-performance fixed-focus laser: engraving without adjusting the focal length, the laser focus area is about 50% smaller than other lasers; up to 5.5W laser power can cut thick wood, acrylic, and rubber materials; at the same time, it can engrave stainless steel and ceramic materials. (Need to be blacked out).

4.Wide compatibility: The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MACs system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.

5.Precise scale lines axis: There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 200*200mm large area engraving interval can meet your various engraving needs.

6.Integral screw rod: The machine uses an integrated screw rod instead of a combined coupling. The stepping motor and the screw rod are integrated, which makes the movement of the laser more precise and the coupling more durable.

7.New laser with knob: It is more convenient and quick to adjust the height of the laser.

8. Colorful gift box packaging: more beautiful and more convenient to give gifts

Note

● When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles.

● Please do not touch the laser emitter with your hand, or it may burn your hand.

● Please avoid strong impact on the machine.

● Children under 14 are not allowed to use this product and children over 14 need adult supervision.

● The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.

Package Included

Assembly block *4

Laser*1

Laser slide*1

Foot pad foam*4

USB cable*1

Open wrench*1

Y-axis belt assembly*1

Marker *1

Cable tie*5

Screw*4

Hexagonal Wrench*2

Wood chips*3

Fixed focus film*1

Acrylic sheet*3

Cutting pad *1

Lower support foot*1

Upper support foot*1

Control box*1

X axis assembly*1

Y axis assembly*1

Power adapter*1

Power cord*1